Haemonetics ACP 215 - Page 172

172 Troubleshooting
P/N: SM-ACP215-01-EN(AB) Haemonetics
®
ACP-215
®
Service Manual
702 CPU RELAY
OPENING
FAILURE
CPU relay fails to open
during system start-up
test.
1. Replace driver PCB.
2. Replace CPU PCB. Using Utilities,
calibrate all components under A/D, and
centrifuge, and configure the language.
Reset protocol parameters (MODIFY
PROGRAM) if parameters were
different from default values.
Table 9, CPU error messages
Cod
e
Text Message Description Suggested Resolution