55
6 - Maintenance
Greasing
General information
Lubricants must be kept at a constant temperature, away from damp,
dust and condensation. Keep containers, funnels and other lubricators
clean; also, clean lubrication points before applying lubricants. Avoid
prolonged physical contact with lubricants.
Always follow quantity recommendations. Where no quantity is
indicated, fill the lubricator until it overflows.
The pictograms in the greasing diagrams show:
1. The lubricant to use (see "Recommended lubricants").
2. The greasing frequency in hours.
IMPORTANT! If you clean the sprayer with a high-pressure cleaner, the equipment should be completely re-greased.
Recommended lubricants
Power take-off lubrication points and frequency
Shaft series 100, PDF type
BEARINGS:
Universal lithium grease,
NLGI no. 2
Shell Retinax EP2
Castrol LMX
SLIDES AND SKIDS:
Lithium grease with
Molybdenum disulphide or
graphite
Shell Retinax HD 2 (or HDX 2)
LUBRICATION POINTS:
Total Transmission TM
SAE 80W/90
Castrol EPX 80W/90
Shell Spirax 80W/90
Mobil Mobilube 80W/90
To Next Page
Loading...
Need help?
General
