8 - Technical specifications
79
Raw materials and recycling
Disposing of the sprayer
When the sprayer reaches the end of its life, it should be cleaned carefully. The tanks, pipes and connectors, made of
synthetic material, may be burned in an incinerator. Metal parts may be sent to a scrap yard. Always comply with current
legislation on waste.
Raw materials used:
Tanks: High density polyethylene
Chassis etc.: Steel
Boom: Aluminium, Steel
Pump: Cast iron
Diaphragms: PUR
Pipes (suction): PVC
Pipes (discharge): EPDM
Valves: Glass-reinforced polyamide
Filters: Polypropylene
Nozzles: Free polyoxymethylene
Connectors: Glass-reinforced polyamide