3/6/08 888-2463-001 MRH-1
WARNING: Disconnect primary power prior to servicing.
Manual Revision History
DiamondCD Series™
REV. DATE ECN Pages Affected
A1 8/10/2001 Document
Change only
Page 5-16 - Updated Driver Setup procedure (Specifically
5.7.1 Setting Bias for Preamp and Driver)
A2 4/17/02 47994 Title Page, MRH-1/MRH-2 and all of Section VII
B 7/11/02 All. Updates for software and hardware changes.
C 11/25/02 48822 Updates for DHD10P1 in Sections 1, 2 and 5.
D 01/10/03 48909 Updated Table 5-3 to include new S3-1 dipswitch settings.
E 5/09/03 49292 Updated Section 5. Changes include: Power Supply Strap-
ping information added and Driver Setup procedure redone
for clarity, along with various small updates.
E1 7/08/03 N/A Updated Parts List. Minor change to Module Phasing in Sec-
tion 2, Installation (Step 11 page 2-24).
F 10/28/03 49606 Updated Tables 2-1 and 5-2 (Cabinet Controller dipswitch S3
Settings) to reflect Alternate VSWR trip adjustment points.
F1 4/19/07 54609 Corrected pallet change procedure Section 5.
F2 3-06-08 Document
Change
Added Appendix C Pioneer Magnetics PS Manual
To Next Page
Loading...
Need help?
General
