HemoCue 201 DM Reference Manual

100
FIGURE 3-84
Confirmation or cancellation of the transfer
of the desired setting(3) is required.
c) To initiate data transfer of the category
indicated(3) to the receiving Analyzer,
press Continue.
To cancel, press No.
d) If the process was initiated, the
connection will be established and the
following text will be displayed:
Transmitting via IR port…
3 Settings to transfer
e) If a connection was established
successfully and the transfer was
accepted by the receiving Analyzer (see
FIGURE 3-85), the same text will continue
to be displayed during data transfer.
When the transfer is completed, the
following text will be displayed for a few
seconds:
Transmission OK
and a beep will be heard if the audible
signal is enabled.
FIGURE 3-83 will be displayed.
f) If no connection was established or
transfer was rejected by the receiving
Analyzer, the following text will be
displayed:
No Connection With Compatible IR
Device.
An error beep will be heard if the audible
signal is enabled. See section
Troubleshooting.
Press the Confirm button.
FIGURE 3-83 will be displayed.
Infra Red
All Settings
NoNo
ContinueContinue
Are You Sure You
Want to Send the
Settings?
3

HemoCue 201 DM Specifications

General

Brand	HemoCue
Model	201 DM
Category	Docking Station
Language	English