24
2.2 Operating the
Analyzer
2.2.1 Start up
FIGURE 2-22
a) Turn the Analyzer on (see 1.3.2 Analyzer
overview). The Start Image, beginning
with the HemoCue logo, will be
displayed.
The Start Image includes the following
information: Analyzer type(1), Software
version(2) and the unique Serial number(3)
of the Analyzer.
1 Analyzer type
2 Software version
3 Serial number
b) If the Cuvette holder is in the measuring
position, the following text will be
displayed:
Please Pull Out the Cuvette Holder.
Pull the Cuvette holder out to the loading
position.
When the Cuvette holder is in the loading
position the Analyzer will perform a
self-test. No function can be activated for
approximately 20 seconds during the
selftesting.
c) If the requirement for Operator ID is set
to “Not Used” (see section 3 Settings), the
Main Menu will be displayed, FIGURE
2-24, without the Operator Name.
If Operator ID is required, the Login
Image will be displayed, FIGURE 2-23.
Glucose 201 DM RT
Version 3.2
Serial no.
1011730021
1
2
3
To Next Page
Loading...
