13
FIGURE 1-8
A Secondary Docking Station cannot be
connected to a LAN. In order to
communicate via a LAN it must be
connected to a Primary Docking Station. A
Secondary Docking Station can
communicate directly to a PC via a USB
connection.
Both Primary and Secondary Docking
Stations can be used singularly.
A set of Multiple Docking Stations,
(maximum five), consists of either one
Primary and a number of Secondary Docking
Stations or of only Secondary Docking
Stations. If a Primary is included, it must be
positioned furthest to the left(1) (when
facing the front of the Docking Station).
Two Primary Docking Stations must not be
connected together.
Primary Docking Stations labelled PDS
+
shall
only be connected to a Secondary Docking
Station labelled SDS
+
. Secondary Docking
Stations labelled SDS
+
shall only be
connected to Docking Stations labelled PDS
+
or SDS
+
.
Malfunction will occur if non-labelled
Docking Stations are connected to PDS
+
or
SDS
+
.
1 Primary or Secondary Docking Station
2 Secondary Docking Station
1
2
To Next Page
Loading...
