July 2017 PLT-01067, Version: A.7
Work Instruction Wizard Page 6-27
6.5 Seos Work Instructions
6.5.1 Seos: HID Access Application
This section covers the Work Instruction wizard for Seos, with the HID Access Application encoding.
1. Select the Seos technology type. Click OK.
2. The Work Instruction Wizard opens to allow you to configure the Work Instruction for Prox.
Click Next.
3. Configure Seos Instruction Mode: You can make selections from the following. When complete
click Next.
Note: For this example, a Write/HID Application configuration is selected.
Field Description
Data Type HID Access Application, Custom, or Read CSN.
Instruction Type Read, Write, Roll Card Authentication Key, or Delete
Options Overwrite Existing Credential: Allows the iCLASS SE Encoder to write over an
application that has already been recorded in the Work Order database.
Note: This is not recommended if the card number is already printed or engraved
onto the credential.
Credential Type Format: Select a Format from the list.
To Next Page
Loading...