Page 6-40 Work Instruction Wizard
PLT-01067, Version: A.7 July 2017
6.5.4 Seos: Custom Encoding (Update Existing Data Object)
To update a card where the ADF already exists, or if the ADF has multiple objects and was created
in a previous Work Instruction, then a distinct type of write operation is required to update the data
object only and not modify any existing keys or data objects.
1. Select the Seos technology type. Click OK.
2. The Work Instruction Wizard opens to allow you to configure the Work Instruction for Prox.
Click Next.
3. Configure Seos Instruction Mode: You can make selections from the following. Click Next.
To Next Page
Loading...