July 2017 PLT-01067, Version: A.7
Work Instruction Wizard Page 6-41
Method 1 (Configure ADF using an existing Work Instruction)
Field Description
Data Type For this example Custom must be selected.
Instruction Type For this example Write must be selected.
Options Not available with Custom.
ADF Configuration ADF OID: A number (8 byte minimum) used to reference the application
after it is created.
Show OID using ASCII characters: Displays ASCII characters.
Custom Writer
Operation
For this example Update Existing Data Object(s) must be selected.
Additionally select the Select ADF Configuration from an existing Work
Instruction option. Select the Work Instruction from the pull-down menu.
Note: This checkbox will only be present if there another Seos Custom Write
Work Instruction was created prior to this Work Instruction.
To Next Page
Loading...