July 2017 PLT-01067, Version: A.7
Work Order Manager Page 5-27
5.15.4 Execute Work Order on Selected Credential Records
This section covers how to execute a Work Order on a credential record.
1. Open a Work Order.
2. Place the correct card type on the CP1000 Desktop Encoder.
3. Select the records to encode (Ctrl+Click or Shift+Click) to select a range of records.
4. From Work Order Manager click Execute Selected.
5. A progress window displays.
6. When the first card is complete, and if more than one credential was selected, a notice displays,
asking to place the next card on the encoder.
7. If prompted to do so, place the next card to be encoded on the reader.
To Next Page
Loading...