July 2017 PLT-01067, Version: A.7
Work Instruction Wizard Page 6-51
6.5.7 Seos: Deleting a Custom ADF
Warning: This operation will delete any data associated with an ADF and the ADF itself and
should only be performed if the ADF and its data is no longer required.
1. Select the Seos technology type. Click OK.
2. The Work Instruction Wizard opens to allow you to configure the Work Instruction for Prox.
Click Next.
3. Configure Seos Instruction Mode: Make selections from the following. Click Next.
Field Description
Data Type For this example Custom must be selected.
Instruction Type For this example Delete must be selected.
Options Not available with Custom.
ADF Configuration ADF OID: A number (8 byte minimum) used to reference the application
after it is created.
Show OID using ASCII characters: Displays ASCII characters.
To Next Page
Loading...