Page 2-18 Encoder Application Navigation
PLT-01067, Version: A.7 July 2017
2.12.4 iCLASS SE Encoder Options Tab
The Options tab contains basic configuration options, along with the option of checking the SAM
Firmware compatibility.
Field Description
Options
You can set several basic configuration options, select all that are needed:
• Load work order from last session at startup
• Automatically focus next row in grid after executing a work order
• Automatically add a new row after executing the last row in a work order
• Prompt user between each credential that is encoded during batch encoding
• Do not show firmware upgrade required dialog on startup
• Dynamically store and load keys and credential counters for encoders not present
when .ise or .xml configuration file is loaded.
Custom Key
Access Code
You must enter the 4-9 digit code to securely access the Custom Keys from a workstation.
This code should be the same across all workstations where custom keys are
automatically synchronized.
Note: The SNMP encoder Admin keys must also match on all workstations where custom
keys are automatically synchronized.
To Next Page
Loading...