Page 7-32 Key Management
PLT-01067, Version: A.7 July 2017
This page intentionally left blank.
7.15 Change Encoder Admin Keys
For security purposes the user should change the Administrative Keys on this device.
1. Select Key Management > File tab.
2. Select the Change Encoder Admin Keys option.
3. Enter the Admin Keys on the Provide New Admin Keys for Encoder window. This can be done
by entering (copy/paste) keys that have been saved earlier.
4. Optionally the user can generate random keys, click Generate Random Keys.
5. Click OK
Warning: It is important that you record these keys for future reference, in a secure location.
These keys are required if the PC hosting the application fails. These keys are entered when
this application is loaded on a new PC to reconnect to the iCLASS SE Encoder, otherwise
credential credits and other important information will be lost.
To Next Page
Loading...