Page 3-8 Setup and Configuration
PLT-01067, Version: A.7 July 2017
3.5 Change Default Admin Password
The Admin password must be modified from the default values immediately (Username: admin,
Password: admin). For security reasons, this access should not be left on the application.
Warning: When creating, a new Admin user, or changing an Admin password, it is important that
this password is saved in a secure location. At this time there is no password reset feature in place.
See Section 9.7: Change Password for detailed information on modifying the default Admin password.
3.6 Add System Users
See Section 9.4: Add a User for detailed information on User Management and adding users.
Warning: When creating, a new Admin user, or changing an Admin password, it is important that
this password is saved in a secure location. At this time there is no password reset feature in place.
To Next Page
Loading...