Page 9-4 User Config
PLT-01067, Version: A.7 July 2017
9.4 Add a User
The application is provided with an Admin level user configured. If a general operator level user, with
limited access is needed, use the following instructions.
1. Select User Config > Add User.
2. A blank New User record displays.
3. Enter the specific configuration for the new user.
Field Description
User ID Enter a User ID (wand over User ID for the field to appear).
Name Enter a user Name (wand over Name for the field to appear).
Use Windows Authentication
This option enables Windows Authentication. If selected the
User ID must match the type of encoder Authentication.
Program Options This option allows this user to have access to program options.
iCLASS SE
The iCLASS SE option allow you to select a Security Level (User
Role) for each user.
No Access - Does not allow access to the application.
Administrator - Sets the user access level at Administrator. There
is no restriction to this level.
Operator - Sets the user access level at Operator. This level
restricts configuration, but allows the user to execute Work
Orders and
To Next Page
Loading...