HID CP1000 - Assign a Template to a Group

July 2017 PLT-01067, Version: A.7
User Config Page 9-11
5. Click the Save icon. The group name is added to the list.
9.7.0.2 Assign a Template to a Group
To assign a card template or work order to a group, complete the following steps:
1. Select User Config module.
2. Select Assign Template to Group from the menu bar.
Data Entry
This option sets the Data Entry access level.
• No Access
• Read/Write Access (with PACS)
• Read/Write Access (no PACS)
• Read-Only Access (with PACS)
• Read-Only Access (no PACS)
iCLASS SE
The iCLASS SE option allow you to select a Security Level (User Role) for each group.
• No Access - Does not allow access to the application.
• Administrator - Sets the group access level at Administrator. There is no restriction
to this level.
• Operator - Sets the group access level at Operator. This level restricts
configuration, but allows the group to execute Work Orders and Encoding.
Field Description