Page 6-32 Work Instruction Wizard
PLT-01067, Version: A.7 July 2017
4. Key Selection: Select the keys that are used for the authentication and securing of data on the
card. Click Next.
5. Data Object Mapping: Configure which Object Tag will be written by this Work Instruction and
how the data will be formatted, and click Next.
Field Description
GDF Key Sets
GDF Auth Key Set: Sets the key set to be used to authenticate to the GDF to
grant access to create the ADF for the HID Access Application. If the card
presented at the time of encoding has the factory default GDF keys, Asure ID
attempts to change the GDF keys.
Field Description
Plugin Type
This defines how the data will be entered by the user in the Work Order Manager, or in
Data Entry. Options are ASCII Text, Hexadecimal Data, Unicode Text, Signed 64-bit
Integer, or Lumidigm Fingerprint Data.
Name
This defines the name of the data field in which the user will enter the custom data.
Object Tag
The Object Tag in Basic Mode is always D0.
To Next Page
Loading...