July 2017 PLT-01067, Version: A.7
Work Instruction Wizard Page 6-37
5. Primary User Key Role: Define a User Key/Role for accessing the default Data Object, and click
Next.
Field Description
Role Name
Rename the Role Name, if desired.
Custom Key
Assign a Custom Key that this Role will use.
Note: If the desired key is not defined, select <Create New Key> from the
drop-down menu.
Seos Key ID
Select the Key ID for the slot in the ADF this key will assume when the
ADF is created.
Role Access Rights
Modify the Role Access Rights as desired. It is recommended that the
Primary User Role has Read and Write access (Change Key access is
optional).
Read Key: Is used to authenticate to a Data Object prior to reading its
contents.
Write Key: Is used to authenticate to a Data Object prior to writing its
data to it.
Change Key: Is used to authenticate prior to a Key Roll operation. See
Section 6.5.8: Work Instruction: Roll Card Authentication Key for details.
Options
Modify the Options (default options)
To Next Page
Loading...