July 2017 PLT-01067, Version: A.7
Reader Configuration Page 8-11
9. Configure the Start and Stop bits for the Wiegand transmission. Click Next.
10.Data Map wizard is complete. Click Finish.
Field Description
STX Bit Adds a bit at the start of the data transmission
Options are: None, Fixed Bit-Logic 0, Fixed Bit-Logic 1, Even Parity, Odd Parity
Bit Number STX computed from bit 0 to Bit Number.
ETX Bit Adds a bit at the end of the data transmission
Options are: None, Fixed Bit-Logic 0, Fixed Bit-Logic 1, Even Parity, Odd Parity
Bit Number ETX computed from bit number to end of data.
To Next Page
Loading...