July 2017 PLT-01067, Version: A.7
Work Instruction Wizard Page 6-17
4. Configure the HID Genuine SO to a new sector. Click Next.
5. When the wizard is complete, click Finish.
6. Return to Section 5.5: Create a Work Order, step 5 to save the Work Order.
Field Description
MIFARE Card Type Options are: 1K or 4K
SO Sector Number Auto Detect
New Sector Number Select new sector number from the drop-down menu. Range is 1-15
New Sector Auth Key Type Options are: Key A or Key B.
New Sector Auth Key Options are Default Transport Key, or defined Authentication key.
To Next Page
Loading...