Figure 3. 26 Adding Device
3. The successfully added device is listed on the User-Device interface.
Figure 3. 27 Device List
4. After having configured the above settings, click Logout on the admin main interface, the message box
“Logout now?” pops up. Click Yes to confirm the logout, or No to cancel the operation.
Deleting a Device
Enter the User-Device interface, you can select the device from the list and click to delete the related device
for the current user. In the pop-up message box, click Yes to confirm the deletion.
Operator User Login
On the User-User List interface, you can click (Login Operator) to directly switch to the Operator user login
interface.
Figure 3. 28 Loging in Operator Interface
To Next Page
Loading...
