Figure 4. 60 Playback by USB File
3. Select the video file from the USB disk for playback.
4. Click Playback to play the selected video file.
Figure 4. 61 Playback
4.6.2 Playback by File
Steps:
1. Click the By File tab on the Local Playback interface to enter the Playback by File interface.
Figure 4. 62 Playback by File
2. Input the Camera No. for playback.
3. Select the record type and file type.
If the encoding device is ATM DVR, you can input the Card No.
4. Set the start time and end time of the video files for playback.
To Next Page
Loading...
