3. Select the handling method (s) by clicking the checkbox (s) for the selected exception type.
Audible Warning: Audible beep when an alarm is detected.
Notify Surveillance Center: Send an exception or alarm signal to remote alarm host when an event occurs.
The alarm host refers to the PC installed with Remote Client.
Email Linkage: Send an email with alarm information to a user or users when an alarm is detected.
Trigger Alarm Output: Trigger an alarm output when an alarm is triggered. You can click the Set button to
set the alarm output (s) to trigger.
4. Click Apply to save the current settings.
4.1.6 Maintenance
Click Maintenance on the remote settings interface to enter the Device Management interface.
Figure 4. 31 Device Maintenance Interface
HDD Management: Set and initialize HDD, and set HDD in group management.
User Management: Add/edit/delete user account, and assign operating permissions for each user.
Device Information: View the version and basic information of the encoder device.
Device Upgrade: Remotely upgrade the device by USB file.
Import/Export: Import/export configuration files.
Restore Default: Restore factory default settings.
Remote Panel: Use the remote front panel of the device to realize operation.
4.1.7 Stream Media Settings
Purpose:
The stream media sever only takes effect when the video needs to be decoded and displayed on the video wall.
The decoder connects with the stream media server to get the video stream.
Steps:
1. Click Stream Media on the remote settings interface to enter the Stream Media Settings interface.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
