Figure 4. 26 Alarm Input Settings
(5) Set the handling action for the selected alarm input by clicking the checkbox of Handling Alarm.
Configure the Arming Schedule and Linkage Action to set up its alarm response actions, as well as
triggered camera and PTZ linkage (calling defined preset / patrol / pattern).
Figure 4. 27 Linkage Action Interface
(6) After having configured the above setting and if you want to configure the other cameras with the
same settings, choose the camera and click Copy. You can also select All to copy the current settings to
all cameras.
(7) Click Apply to save the current settings and Cancel to return to the previous interface.
Please refer to the User Manual of the current DVR for detailed instructions.
2. Configuring Alarm Output
(1) Click Set beside Alarm Output to enter the Alarm Output Settings interface.
(2) Select the alarm output for configuration.
(3) Set the Hold For (duration) time for the alarm output.
Figure 4. 28 Alarm Output Settings
To Next Page
Loading...
