keys on the keyboard to enter the text box below. Finally, click Add to add the current macro command.
Up to 128 macro commands can be added.
Max. 6 numerals can be included in a macro command.
The local decoding and live view operation is not supported currently.
Figure 4. 56 Adding Macro
Viewing Macro
The added Macro commands are listed on the Macro Settings-Macro List interface.
You can click to view each macro command.
Figure 4. 57 Viewing Macro
Running Macro
Select a command from the list and click to run the command, or directly click Num + MAC keys on the
interface to call the macro command.