Persons in this schedule do not need to check-in when they come to work.
Check-out Not Required
Persons in this schedule do not need to check-out when they end work.
Scheduled on Holidays
On the holidays, this schedule is sll eecve and the persons needs to go to work according
to the schedule.
Eecve for Overme
The persons' overme will be recorded for this schedule.
8. Click Save.
Set Person Schedule
You can assign the shi schedule to one or more persons. You can also view and edit the person
schedule details.
Before You Start
Add department and person in Person module. See Person Management for details.
Steps
Note
The person schedule has the higher priority than department schedule.
1. Click Time & Aendance → Shi Schedule to enter the Shi Schedule page.
2. Click Person Schedule to enter Person Schedule page.
3. Select the organizaon and select the person(s).
4. Select the
shi from the drop-down list.
5. Oponal: Enable Mulple Shi Schedules and select the eecve me period(s) from the
added
metables for the persons.
Note
This is only available for shi with only one metable.
Mulple Shi Schedules
It contains more than one metables. The person can check in/out in any of the metables
and the aendance will be eecve.
If the mulple shi schedules contains three metables: 00:00 to 07:00, 08:00 to 15:00 and
16:00 to 23:00. The
aendance of the person adopng this mulple shi schedules will be
eecve in any of the three metables. If the person checks in at 07:50, it will apply the
nearest metable 08:00 to 15:00 to the person's aendance.
6. Set the start date and end date.
7. Set other parameters for the schedule.
Face Recognion Terminal User Manual
127
To Next Page
Loading...
Need help?
General
