HIKVISION DS-K1TA70MI-T

Steps
1. Enter the Person module.
2. Select an added
organizaon in the list, or click Add in the upper-le corner to add an
organizaon and then select it.
3.
Click Import to open the Import panel and check Face.
4. Oponal: Enable Verify by Device to check whether face recognion device managed in the
client can recognize the face in the photo.
5. Click
to select a face picture le.
Note
• The (folder of) face pictures should be in ZIP format.
• Each picture
le should be in JPG format and should be no larger than 200 KB.
• Each picture
le should be named as "Person ID_Name". The Person ID should be the same
with that of the imported person informaon.
6. Click Import to start imporng.
The imporng progress and result will be displayed.
7.4.14 Export Person
Informaon
You can export the added persons' informaon to local PC as a CSV/Excel le.
Before You Start
Make sure you have added persons to an
organizaon.
Steps
1. Enter the Person module.
2.
Oponal: Select an organizaon in the list.
Note
All persons' informaon will be exported if you do not select any organizaon.
3. Click Export to open the Export panel.
4. Check Person Informaon as the content to export.
5. Check desired items to export.
6. Click Export to save the exported
le in CSV/Excel le on your PC.
7.4.15 Export Person Pictures
You can export face picture
le of the added persons and save in your PC.
Before You Start
Make sure you have added persons and their face pictures to an organizaon.
Face Recognion Terminal User Manual
78