HIKVISION DS-K1TA70MI-T - 7.3 Group Management

The person informaon, including person details, and the linked cards (if congured), will be
imported to the selected organizaon.
7.4.17 Move Persons to Another Organizaon
You can move the added persons to another organizaon if you need.
Before You Start
•
Make sure you have added at least two organizaons.
• Make sure you have imported person informaon.
Steps
1. Enter Person module.
2. Select an
organizaon in the le panel.
The persons under the organizaon will be displayed in the right panel.
3. Select the person to move.
4. Click Change
Organizaon.
5. Select the
organizaon to move persons to.
6. Click OK.
7.4.18 Issue Cards to Persons in Batch
The client provides a convenient way to issue cards to mulple persons in a batch.
Steps
1. Enter Person module.
2. Click Batch Issue Cards.
All the added persons with no card issued will be displayed in the right panel.
3.
Oponal: Enter key words (name or person ID) in the input box to lter the person(s) that need
issuing cards.
4.
Oponal: Click Sengs to set the card issuing parameters. For details, refer to .
5. Click Inialize to inialize the card enrollment staon or card reader to make it ready for issuing
cards.
6. Click the Card No. column and enter the card number.
-
Place the card on the card enrollment
staon.
-
Swipe the card on the card reader.
-
Manually enter the card number and press the Enter key.
The person(s) in the list will be issued with card(s).
Face Recognion Terminal User Manual
80