HIKVISION DS-K1TA70MI-T

7.12.4 System Maintenance
You can reboot the device remotely, restore the device to default sengs, import conguraon
le,
upgrade the device, etc.
Reboot
On the Device for Management page, click → System → System Maintenance to enter the
System Maintenance tab.
Click Reboot and the device starts
reboong.
Restore Sengs
On the Device for Management page, click Remote Conguraon → System → System
Maintenance to enter the System Maintenance tab.
Restore Default
The parameters will be restored the default ones, excluding the IP address.
Restore Part of Sengs
Restore all sengs except communicaon sengs and the remote user sengs to default ones.
Restore All
All device parameters will be restored to the default ones. The device should be acvated aer
restoring.
Import and Export
On the Device for Management page, click Remote Conguraon → System → System
Maintenance to enter the System Maintenance tab.
Import or export
conguraon le.
Import Conguraon File
Import the conguraon le from the local PC to the device.
Note
The conguraon le contains the device parameters.
Export Conguraon File
Export the conguraon le from the device to the local PC.
Note
The conguraon le contains the device parameters.
Upgrade
On the Device for Management page, click Remote Conguraon → System → System
Maintenance to enter the System Maintenance tab.
Face Recognion Terminal User Manual
138