HIKVISION DS-K1TA70MI-T User Manual

7.12.17 Congure Video and Audio Parameters
You can set the device camera's image quality, resoluon and other parameters.
Steps
1. Click Maintenance and Management → Device to enter the device list.
2. Click
to enter the remote conguraon page.
3. Click Image → Video & Audio to enter the
sengs page.
4. Set the device camera's parameters, including the stream type, the bitrate type, the video
quality, the frame rate, the audio encoding type, the video type, the bitrate, the
resoluon, and
the I frame interval.
5. Click Save.
7.12.18
Congure Volume Input or Output
Steps
1. On the Device for Management page, click
→ Image → Audio Input or Output to enter
Audio Input or Output tab.
2. Move the block to adjust the device input and output volume.
3. Click Save.
7.12.19 Operate Relay
Steps
1. Click Maintenance and Management → Device to enter the device list.
2. Click
to enter the remote conguraon page.
3. Click Operaon → Relay .
4. Enable or disable the relay.
7.12.20 View Relay Status
Click Maintenance and Management → Device to enter the device list.
Click
to enter the remote conguraon page.
Click Status → Relay and you can view the relay status.
Face Recognion Terminal User Manual
145

HIKVISION DS-K1TA70MI-T Specifications

General

Brand	HIKVISION
Model	DS-K1TA70MI-T
Category	IP Access Controllers
Language	English