HIKVISION DS-K1TA70MI-T User Manual

Figure 6-18 Auto Aendance Mode
3. Select an aendance status and set its schedule.
1) Select Check In, Check Out, Break Out, Break In,
Overme In, or Overme Out as the
aendance status.
2) Tap Schedule.
3) Select Monday, Tuesday, Wednesday, Thursday, Friday, Saturday, or Sunday.
4) Tap the select date and set the selected
aendance status's start me.
5) Tap Conrm.
6) Repeat step 1 to 5 according to your actual needs.
Note
The aendance status will be valid within the congured schedule.
4. Tap .
Result
When you
authencate on the inial page, the authencaon will be marked as the congured
aendance
status according to the congured schedule.
Example
If set the Break Out Schedule as Monday 11:00, and Break In Schedule as Monday 12:00, the valid
user's authencaon from Monday 11:00 to 12:00 will be marked as break.
6.11.3 Set Manual
Aendance via Device
Set the aendance mode as manual, and you can select a status manually when you take
aendance.
Face Recognion Terminal User Manual
50

HIKVISION DS-K1TA70MI-T Specifications

General

Brand	HIKVISION
Model	DS-K1TA70MI-T
Category	IP Access Controllers
Language	English