HIKVISION DS-K1TA70MI-T

Note
The maximum duraon for adding a face picture is 15s. You can check the remaining me for
adding a face picture on the le of the page.
9. Enable or disable the Administrator Permission funcon.
Enable Administrator Permission
The user is the administrator. Except for the normal aendance funcon, the user can also
enter the Home page to operate aer authencang the permission.
Disable Administrator Permission
The User is the normal user. The user can only
authencate or take aendance on the inial
page.
10. Tap to save the sengs.
6.4.3 Add Card
Add a card for the user and the user can authencate via the added card.
Steps
1. Long tap on the inial page and log in the backend.
2. Tap User → + to enter the Add User page.
3. Tap the Employee ID.
eld and edit the employee ID.
Note
• The employee ID should be less than 32 characters. And it can be a
combinaon of lower
leers, upper leers, and numbers.
• The employee ID should not be duplicated.
4. Tap the Name eld and input the user name on the so keyboard.
Note
• Numbers, upper case
leers, lower case leers, and special characters are allowed in the user
name.
• Up to 32 characters are allowed in the user name.
5. Tap the Card eld and input the card No.
6. Congure the card No.
-
Enter the card No. manually.
-
Swipe the card over the card swiping area to get the card No.
Face Recognion Terminal User Manual
32