Hill-Rom Progressa Bed - Line-Of-Site Head Angle Indicator; Brake Not Set

Information Indicators
Progressa™ Bed User Manual (171528 REV 1) 15
Line-of-Site® Head Angle Indicator
The head angle indicators mechanically indicate the approximate
angle of the head section from -15° to +80° with respect to the
floor. The head siderails contain head angle indicators on their
outboard sides. The degree where the indicator ball rests is the
correct angle. The angle indication is also shown on the home
screen on the GCI.
Brake Not Set
The Brake Not Set is an audible and visual alarm. The alarm will sound, and a message will show on
the GCI, when the bed is connected to an AC power source and the brake is not set.