Hill-Rom Progressa Bed - Set Custom Settings; Opti·rest; Start Opti-Rest; Stop Opti·rest

Surfaces
Progressa™ Bed User Manual (171528 REV 1) 63
If rotation therapy is on and Percussion and Vibration is started (in left, right, or center), Rotation will be
turned off automatically. Turn Rotation back on if desired.
Set Custom Settings
1. Press Custom.
2. Press the applicable setting.
3. Change the setting as applicable.
4. Press Start when all settings are correct.
The following settings can be customized
• Position: Right/Left/Center or Rotation
• Turn %: For right and left position only
• Percussion/Vibration: Right/Left/Center
or Rotation
• Percussion frequency: 1 to 5 Beats per
Sec
• Intensity: Low-Med-High
• Duration: 5 to 30 minutes, adjusted in
increments of 5 minutes.
• Vibration frequency: 5 - 25 Beats per
Sec (BPS)
• To operate Percussion and Vibration separately, select Intensity Off for the therapy that is not
desired.
Opti·Rest
The Opti-Rest mode offers wave-like motions in the surface while maintaining pressure relief. It adjusts
the pressure in the chest, seat, and thigh zones producing a massaging wave-like action.
Start Opti-Rest
1. Press the Surface
control on the GCI.
2. Press Opti-Rest.
3. Opti-Rest is active when
the button turns green.
Stop Opti·Rest
1. Press the Surface
control on the GCI.
2. Press Normal control.