8.3 Selecting the Connections and Protocol
100
Selecting the Communication Conditions
1
(The SHIFT indicator lights up.)
The Menu display appears.
2
Select the Interface Selection display.
See "1.4 Menu Display Sequence (SHIFT > ENTER)" ( p.13).
3
Select RS-232C or GP-IB on the sub display.
rS ........... RS-232C
GP-Ib..... GP-IB
Prn......... Printer
When you select RS-232C, set the communications speed.
When selecting GP-IB, also set the
Address and Message Terminator
.
4
Applies the settings and returns to the Measurement display.
(Main display)
(Sub display)
The current setting blinks.
(Sub display)
Message Terminator setting (LF/CRLF)
Address setting (0 to 30)
Selects the item to set Setting
To Next Page
Loading...
