8.5 Message List
113
8
Chapter 8 RS-232C/GP-IB Interfaces
Device-Specific Commands
Message ([ ] = optional) Data Formats (Response
data if a Query)
Description Ref
page
Event Registers
:ESE0
0 to 255 Sets Event Status Enable Register 0 123
:ESE0?
0 to 255 Queries Event Status Enable Register 0 123
:ESR0?
0 to 255 Queries Event Status Register 0 123
:ESE1
0 to 255 Sets Event Status Enable Register 1 123
:ESE1?
0 to 255 Queries Event Status Enable Register 1 123
:ESR1?
0 to 255 Queries Event Status Register 1 123
Measurement Mode
:FUNCtion
RV/ RESistance/ VOLTage Sets measurement mode 124
:FUNCtion?
RV/ RESistance/ VOLTage Queries measurement mode 124
Measurement Range
:RESistance:RANGe
0 to 3100 Sets resistance measurement range 124
:RESistance:RANGe?
3.000E-3 to 3.0000E+3 Queries resistance measurement range 124
:VOLTage:RANGe
-1000 to 1000 Sets voltage measurement range 124
:VOLTage:RANGe?
10.00000E+0 to
1.00000E+3
Queries voltage measurement range 124
Auto Range
:AUTorange
1/ 0/ ON/OFF Sets the auto range 125
:AUTorange?
ON/ OFF Queries the auto range setting 125
Zero-Adjust
:ADJust:CLEAr
Cancels zero-adjustment 125
:ADJust?
0/ 1 Executes zero-adjustment and queries the result 125
Sampling Rate
:SAMPle:RATE
FAST/ MEDium/ SLOW Sets the sampling rate 125
:SAMPle:RATE?
FAST/ MEDium/ SLOW Queries the sampling rate setting 125
Averaging Function
:CALCulate:AVERage:STATe
1/ 0/ ON/OFF Sets averaging function execution 126
:CALCulate:AVERage:STATe?
ON/ OFF Queries the averaging function execution setting 126
:CALCulate:AVERage
2 to 16 Sets the no. of samples to average 126
:CALCulate:AVERage?
2 to 16 Queries the no. of samples to average setting 126
Comparator
:CALCulate:LIMit:STATe
1/ 0/ ON/OFF Sets comparator execution 126
:CALCulate:LIMit:STATe?
ON/OFF Queries the comparator execution setting 126
To Next Page
Loading...
