1.5 Measurement Flowchart
14
The basic measurement process flow is as follows:
For details about the functions that can be applied to measurement values such
as comparator, trigger and averaging functions, refer to "Chapter 4 Applied
Measurement" ( p.39).
1.5 Measurement Flowchart
Selecting the line frequency ( p.20)
Turning the power on ( p.18)
Connecting the test leads ( p.17)
Connecting the power cord ( p.16)
Setting sampling rate ( p.30)
Setting measurement range ( p.27)
Selecting measurement mode ( p.26)
Executing zero-adjustment
Short-circuiting the test leads together ( p.31)
Measurement Preparations
Instrument’s Settings
Zero-Adjustment
Reading the measured value ( p.35)
Connecting the test leads to a test object.
Measurement Start
To Next Page
Loading...
