Hioki BT3564 - Page 155

8.6 Message Reference
149
8
Chapter 8 RS-232C/GP-IB Interfaces
Set and Query Trigger Delay Interval
Syntax
Command
:TRIGger:DELay <0 to 9.999>
Query
:TRIGger:DELay?
Response <0 to 9.999 (NR2)>
Description
Command Sets the trigger delay interval.
Query Queries the trigger delay interval setting.
Example
Command
:TRIG:DEL 0.058
Sets the trigger delay to 0.058 seconds.
Query
Response
:TRIG:DEL?
0.058
The trigger delay is set to 0.058 seconds.
Read the Latest Measurement
Syntax
Query
:FETCh?
Response <Measured resistance (NR3)>, <Measured voltage (NR3)>
(
V mode)
<Measured resistance (NR3)> (
 mode)
<Measured voltage (NR3)> (V mode)
Description
Query Reads the most recent measurement. No trigger occurs.
Example
Query
Response
:FETC?
288.02E-3,1.3921E+0 (V mode)
The last measured resistance is 288.02 m
, and the last measured
voltage is 1.3921 V.
See " Measurement Value Formats" ( p.151).
HIOKI BT3564A961-02