Appendix 9 Test Lead Options
A16
Model L2100 Pin Type Lead
(1000 V DC or less)
Model L2110 Pin Type Lead
(1000 V DC or less)
These high-voltage pin-shaped leads incorporate a
four-terminal design and can be used with up to
1000 V DC, making them ideal for use with high-volt-
age battery packs and cells with high input-to-ground
voltages. The parallel two-pin type tips provide stable
contact with the target object.
Bifurcation-to-probe length: approx. 300 mm
Plug-to-bifurcation length: approx. 850 mm
Between pin bases: 2.5 mm
These high-voltage pin-shaped leads incorporate a
four-terminal design and can be used with up to
1000 V DC, making them ideal for use with high-volt-
age battery packs and cells with high input-to-ground
voltages. The parallel two-pin type tips provide stable
contact with the target object.
Bifurcation-to-probe length: approx. 750 mm
Plug-to-bifurcation length: approx. 850 mm
Between pin bases: 2.5 mm
850 mm300 mm
Tip pin
*Tip pins can be exchanged ahead.
850 mm750 mm
*Tip pins can be exchanged ahead.
Tip pin
To Next Page
Loading...
