Hitachi PXR-D User Manual

4-8 ● Setting the User Environment
1234567890
User environment setup
Repeat print sensor mode［１］(1: signal ON 2: OFF-ON transition)
Reverse direction printing ［０］(0: Disable 1: OFF=ABC 2: OFF=CBA)
Reverse print  ［１］(1: method1 2: method2)
Speed compensation ［０］(0: Disable 1: Enable)
Print signal type ［１］(1:print. complete 2: print.-in-progress)
Method to apply print data［１］(1: method1 2: method2)
Create messages ［０］(0: access 1: protect)
2011.07.07 12:45
Back
Incre-
ment
Decre-
ment
Manual
Show
cursor
Start
up
Shut
down
Comm
On/Off
Prev.
set-
tings
Next
set-
tings
↑
↓
Status: Ready Com=0
Char. Size menu 1 ［１］(1: 5×82: 5×7)
Char. Size menu 2 ［１］(1: 7×102: 9×83: 9×7)
Excitation V-ref. warning ［１］(0:Disable 1:Enable)
→
←
If the cursor is not
displayed, press
Show cursor .
7
6
Press Apply .
3 Press User environment setup .
The "User environment setup" screen then opens.
5
4
Press ↓ three times consecutively.
The cursor then moves to the output signal field.
Press 2 .
The output signal field then reads "print. in progress" .
Press Back .
The system then returns you to the "Environment setup menu" screen.
Cursor will move to the
line you touched.
Selected item on the
cursor-positioned line
can be changed
by touching.

Hitachi PXR-D Specifications

General

Brand	Hitachi
Model	PXR-D
Category	Printer
Language	English