Hitachi PXR-D User Manual

1-4 ● Usage Precautions
(3) Storage precautions
Store the ink and makeup ink in a cold dark place (0 to 20℃). (Observe this rule
no matter whether tanks are unsealed or not.)
The storage validity period is predefined for the ink and makeup ink. Begin to
use the ink/makeup ink before the "Expiration date" (「開封期限」) date arrives.
Once an ink bottle is opened, even if it is stored, the bottled ink begins to
deteriorate in the same manner as the ink in the printer. If the above-indicated
"approximate elapsed days" limit is exceeded, discard the bottle of ink. (When
an ink bottle is opened, indicate the date of opening on the bottle's label for
proper management purposes.)
The makeup ink must be added to the printer within one year after opening the
tank. Note that the makeup ink added to the printer needs no replacement.
1
2
3
4
The ink which you can use differs with areas.
Please confirm ink which you can use to each area's distributors.
Notice
¡ Do not drain the ink or makeup ink waste solution into public sewer
systems or elsewhere. Waste disposal must comply with all apropriate
regulations. Consult the appropriate regulatory agency for further
information.
WARNING
(4) Ink differences and handling precautions
Differences
1
For the part code numbers for the above inks and makeup ink, see Section 12,
"Maintenance".
Ink type
Applicable
makeup ink
Operating temperature range
65μm 40μm
JP-K26 TH-TYPE B
0 to 35℃
Inapplicable
100μm
0 to 35℃
Inapplicable
0 to 35℃
Inapplicable
0 to 35℃
Inapplicable
JP-K27 TH-TYPE A
0 to 45℃ 0 to 35℃
JP-R27 TH-TYPE A
0 to 35℃
Inapplicable
0 to 35℃
Inapplicable
0 to 35℃
Inapplicable
0 to 35℃
Inapplicable
0 to 35℃ 0 to 35℃
Inapplicable
0 to 35℃
JP-B27 TH-TYPE C
JP-G27 TH-TYPE A
JP-K28 TH-TYPE A
JP-K31A TH-TYPE E
JP-K33 TH-18
JP-Y37 TH-TYPE E
JP-K60 TH-60
JP-K61 TH-23
JP-K62 TH-18
JP-F63 TH-63
JP-T64 TH-18
JP-K65 TH-65
JP-R65 TH-65
JP-K67 TH-TYPE A
JP-K68 TH-TYPE F
JP-K69 TH-69
JP-K70 TH-70
JP-T71 TH-71
JP-K72 TH-18
JP-T75 TH-75
JP-R76 TH-76
JP-K84 TH-84
JP-K77
TH-77
JP-E78 TH-78
JP-F80
JP-K81
JP-B82
JP-K86
TH-80
TH-81
TH-82
TH-86
JP-K87 TH-18
0 to 45℃
0 to 35℃
0 to 45℃
Inapplicable
0 to 35℃
0 to 35℃
0 to 40℃
Inapplicable
0 to 35℃
Inapplicable
Inapplicable
0 to 35℃
15 to 35℃
10 to 35℃
0 to 35℃
0 to 40℃

Hitachi PXR-D Specifications

General

Brand	Hitachi
Model	PXR-D
Category	Printer
Language	English