Hitachi PXR-D User Manual

5-21 ● Calibrating the Touch Screen Coordinates
3
Status: Stop Com=0
＋
Carefully touch the intersection of
the crosshairs.
Touch screen coord.
2011.07.07 12:45
Press Calibrate touch screen coordinates .
The touch screen coordinates screen then opens.
4
Press the + mark at the upper left-hand corner.
The + mark appears at the bottom right.
Status: Stop Com=0
＋
Carefully touch the intersection of
the crosshairs.
Touch screen coord.
2011.07.07 12:45
5 Press the + mark at the bottom right.
6 Hold down the + mark at the top left and bottom right until the system
displays a confirmation message for Touch Screen Coordinate
Correction.
The touch screen coordinate correction confirmation message then appears.
7
＝＝＝＝＝ Touch Screen Coordinate Correction ＝＝＝＝＝
Touch screen coordinate correction will be applied.
To return to the previous setting, press [Cancel].
OK Cancel
Press OK .
The system then corrects the coordinates and returns you to the auxiliary
function menu.

Hitachi PXR-D Specifications

General

Brand	Hitachi
Model	PXR-D
Category	Printer
Language	English