(2) Time interval (T2) between IJ printer response and printing start
¡
The IJ printer executes an internal process to make printing preparations in accordance
with the received print data. Do not enter the print start signal during internal process
execution.
¡
In the overwrite-protected mode, initiate the next communication after completion of
printing.
¡
In the overwrite-enabled mode, the next communication can be transmitted during
printing, but the ACK/NAK response does not return until the ongoing printing operation
is complete. (t=async.)
¡
When a print start signal is input with shorter timing than T2, the fault "Print data
changeover in progress M" occurs.
*2 If the communication time interval is not sufficiently secured, it may not operate
normally.
T2 Maximum time (ms)
N + 15
(N: Number of
communication items)
0
400
40
400
400
200
25
Conditions
The print message
transfer ACK
condition is t=fixed.
The print message
transfer ACK
condition is t=async.
When the character
height, character
width, character
orientation, repeat
count, ink drop use
percentage,
or print format
changes before or
after recall
When the character
height, character
width, character
orientation, repeat
count, ink drop use
percentage,
or print format does
not change before or
after recall
Print specifications
Print format
Overall column setup
−
Transmission type
Print description
Print data recall
Print conditions
User pattern
character
No.
1
2
3
4
5
6
Remarks
To Next Page
Loading...
Need help?
General
