Hitachi PXR-D User Manual

6-52 ● Warning Messages
Error
Name Description Check
code
013 ESC code error The ESC code position was illegal.
Check the transmission
procedure and ESC code.
014 Parity error The parity error occurred.
Check the baud rate
and data format.
015
Print format
code error
The print format data value was illegal.
Check the print format
transmission text section.
016 Overrun error The overrun error occurred.
Check the baud rate
and data format.
017 Framing error The framing error occurred.
Check the baud rate
and data format.
019 2-byte code error
¡An illegal 2-byte code (2 bytes per
character) was transmitted.
¡Only one byte of 2-byte code was
transmitted.
Check the 2-byte code
transmission text.
020
Print data
code error
¡The print data registration number was
illegal.
¡An unregistered number was
encountered.
Check the print data
recall / transmission
code.
021 SI/SO code error
The SI (shift in) or SO (shift out) code
position was illegal.
Check the printings
communication text.
022
User pattern
character size/
character code
error
The character size or character code
values were illegal.
Check the user pattern
communication text.
023
High-speed
printing setup
error
¡When necessary conditions for high
speed printing were not satisfied, NM or
QM mode was transmitted.
¡When High speed printing NM or QM
mode was set, a setting which did not
satisfy necessary conditions for high
speed printing was transmitted.
Check the print
specifications
communication text.
024
Calendar/count
conditions error
¡Transmitted to print item where
calendar/count characters were not
present.
¡Set value was outside specifications.
¡Zero suppression transmission was
performed to print item for which
barcode had been set.
Check calendar/count
condition
communication text.
026
Bar code setup
error
¡A character undefined for bar code use
was found in the printings.
¡The number for ITF did not consist of an
even number of numerals beginning
with an odd digit position.
¡The input data for EAN-13 was not 10
digits.
Check the printings print
format communication
text.
027 Printings error
¡A dedicated character or katakana was
transmitted in a character size which
cannot be inputted.
¡The three characters of a dedicated
character string were not properly
grouped.
¡A count value is out of a count range.
¡Count character was transmitted to
calendar item.
Check the printings
communication text
031
Create messages
error
¡While "Create messages" function was
operating, on-line transmission was
performed.
¡On-line transmission was performed
when print data which was controlled
separately from data created and
registered by print description screen,
was present.
Check the timing of
on-line transmission.

Hitachi PXR-D Specifications

General

Brand	Hitachi
Model	PXR-D
Category	Printer
Language	English