Hitachi PXR-D User Manual

● Ink Replacement 7-14
19
18
Return the ink filter to its original state (piping D is the downside).
Piping (D)
Ink filter
Press the Start/Continue key.
¡ The "Circulation control" screen then opens as follows.
Circulation control 2011.07.07 12:45
Cancel
Process after
long-term shutdown
Ink replacement
Nozzle backwash
Process prior to
long-term shutdown
Ink circulation
Gutter cleaning
Makeup ink refill
Eject ink
(Goes to standby)
Cleaning stop No-cleaning stop
Start/
Continue
Select option, press [Start/Cont.]. Proc. status: ended.
Status: Standby
Ink filter
replacement
Prev.
menu
Next
menu
The ink replacement is now completed.
When you install the print head cover, the IJ printer goes into the
"Standby state" (ink ejection and deflection voltage OFF).
To initiate printing, open the Manual Control menu and sequentially
press the Ready and OK keys to enter the "Ready" state.
20
Open the "Operation management" screen, and set the operating
time to 0.
For the procedure, see Section 4.1 Managing the Operations.

Hitachi PXR-D Specifications

General

Brand	Hitachi
Model	PXR-D
Category	Printer
Language	English