12-5 ●Maintenance
Descriptions of maintenance services
Your Hitachi ink jet printer is warranted against defective material or workmanship for
a period of one year or 2400 run hours from the date of purchase (free of charge). In
the event of any of the failures listed below, repairs will be charged even within the
warranty period.
(1) Failures caused by abnormal use or operation (operation not stated in the
operation manual)
(2) Failure caused by the use of improper material (including ink) or replacement
parts
(3) Failures caused by improper servicing (by unauthorized personnel)
(4) Failures caused by troubles (conveyor or product troubles) outside the ink jet
printer or caused by movement or delivery of the ink jet printer after installation
(5) Failures caused under improper operating conditions
(6) Failures caused by fires, floods, or other disasters
Hitachi will not be liable for any manufacturing loss due to a hangup of the
ink jet printer and product damages (product or facility loss) due to a trouble
or malfunction of the ink-jet printer. However, in the event of a printer
hangup, Hitachi will send service engineers as immediately as possible to
repair the printer and reduce the hangup time.
Parts availability
The replacement performance parts for this product are available for a period of 7
years after product discontinuation. The replacement performance parts are
parts that are required for the maintenance of product functionality.
Customer's memo:
Fill out the following form for your future reference.
This memo will be helpful when you contact your Hitachi
distributor.
Your Hitachi sales
representative :
Telephone
Person in charge
Telephone
Person in charge
Your Hitachi
distributor:
Date of purchase : yy mm dd
To Next Page
Loading...
Need help?
General
