Honda BF40D - Page 208

10-23
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
b. PRIMARY DRIVE GEAR
Install the primary drive gear on the crankshaft using the
special tool and the hydraulic press as shown.
TOOL:
Driver, 22 mm I.D. 07746-0020100
c. CRANKCASE/CRANKSHAFT/CYLINDER BLOCK
1) Apply engine oil to the outer surface of a new 6005 radial
ball bearing.
2) Drive the 6005 radial ball bearing into the cylinder block
using the special tools as shown.
TOOLS:
Attachment, 42 x 47 mm 07746-0010300
Driver 07749-0010000
Pilot, 25 mm 07746-0040600
[3]
PILOT, 25 mm
07746-0040600
[1]
DRIVER
07749-0010000
[4]
ATTACHMENT,
42 x 47 mm
07746-0010300
[2]
6005 RADIAL
BALL BEARING
[2]
PRIMARY
DRIVE GEAR
[1]
DRIVER,
22 mm I.D.
07746-0020100
208