Honda BF40D - Tiller Handle

20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
16-6
4) Remove the handle cable 14P connector and the handle
cable 6P connector from the main relay bracket, and
disconnect the 14P connector and the 6P connector.
2. TILLER HANDLE
a. REMOVAL
1) Remove the engine cover (P. 4-2).
2) Move the tiller handle shift lever to the "N" (Neutral)
position.
3) Remove the two 6 x 28 mm flange bolts, two 6 x 40 mm hex
bolts and the two 6 mm washers, and remove the separate
case.
[1]
HANDLE CABLE
14P CONNECTOR
[2]
HANDLE CABLE
6P CONNECTOR
[3]
MAIN RELAY
BRACKET
6 x 28 (2)
[1]
SEPARATE
CASE
[3]
6 x 40 mm HEX
BOLT (2)
[2] 6 mm
WASHER (2)
570