Honda BF40D - Starter Cable;Starter Solenoid; Main Relay;Neutral Switch

18-15
3. STARTER CABLE/STARTER SOLENOID/MAIN RELAY/
NEUTRAL SWITCH
a. REMOVAL/INSTALLATION
Remove the following parts.
- Engine cover (P. 4-2)
- Silencer (P. 5-89)
- Tiller handle (P. 16-6)
Install and route the connectors and harnesses in the proper positions (P. 2-58).
8 x 18
[10]
CABLE CLIP BRACKET
6 x 12
[9]
HARNESS BAND CLIP
[6]
MAIN RELAY
BRACKET
6 x 14 (3)
[8]
RELAY SUSPENSION
INSPECTION: P. 18-17
[7]
MAIN RELAY
INSTALLATION: P. 2-59
[1]
STARTER CABLE (
- )
[5]
NEUTRAL
SWITCH
BRACKET
6 x 12
[3]
NEUTRAL
SWITCH PLATE
2.5 N
.
m (0.3 kgf
.
m, 1.8 lbf
.
ft)
[2]
20 mm HEX NUT
INSPECTION: P. 18-17
[4]
NEUTRAL SWITCH
INSTALLATION: P. 2-59
[11]
STARTER CABLE (+)
688